Picture this: you enter the bathroom, lift the toilet lid, and encounter the disgusting sight of a yellow-stained buildup in the bowl. That sounds pretty nasty, and it could happen to you if you don’t address those hard water stains in your toilet.
Clean the mineral buildup before it’s too late! If you want to eliminate those awful stains in your toilet, keep reading to learn how to do it.
What are hard water stains?
Hard water stains can appear despite cleaning your bathroom. They form due to minerals in the water—once the water evaporates, minerals left behind harden. The higher the number of minerals in the water, the easier it is for limescale to appear.
Also, you have to be careful, as too much buildup can clog your pipes or damage your toilet.
How to remove hard water stains from your toilet
You can clean your toilet without worrying about getting extra cleaning products. Everything you need should be in your house already. You’ll save time and money!
Step #1. Prepare your toilet
You’ll be using homeowners’ old favorite cleaning products for this. Pour one cup of vinegar into the toilet bowl and swish it covering the surface completely. Then, let it sit for 5 minutes.
Step #2. Make it bubble
Drop one cup of baking soda into your toilet bowl. Then, add more vinegar (one or two cups) and wait for 10 minutes.
Once time’s up, grab your toilet brush and swirl the mix around, rubbing the stained spots. Make sure to cover every corner.
Step #3. Double-check and flush
From time to time, let the solution settle to spot any remaining limescale so you can keep scrubbing the stains. To avoid the effort, let the mix sit for 30 minutes while it dissolves the minerals before scrubbing again. After you are sure no more stains are left, flush the toilet.
Extra step: use a pumice stone for stubborn spots
Pumice stones are super helpful in taking out mineral stains from your toilet bowl. So, consider using one if there are lingering dirty spots after using vinegar and baking soda.
Start by wetting with clean water both the stone and the area you will clean; otherwise, you could damage the porcelain. Keep the area wet at all times.
Although a stone, pumice is soft and will start disintegrating when scrubbing the stain away. It works better if you don’t rinse the residue as its texture helps remove the stains—flush everything after finishing.
How to prevent hard water buildup
You can stop limescale from building up in your toilet by pouring one cup of vinegar into the water tank monthly. Let it sit for 30 minutes before flushing. This way, you’ll prevent clogged pipework.
You can also scrub your toilet weekly to remove any limescale before it hardens.
Let CleanArte Maid Services keep your home clean!
A clean bathroom is only the start of a clean house. If it’s too much work, hire the best cleaning team in Houston and relax while we clean your place! Don’t worry about anything; your home will be in good hands with our highly-skilled cleaners!